Exhibition Calendar
Photonics Festival
9-11 Jun, 2010
10th OPTATEC
15-18 Jun, 2010
Distributor Area
Beam Shaper
This is our latest developed item from Wavelength Technology. The beam shaper is functioned to change the Gaussian profile of a light source (commonly laser) to become a Top-Hat profile.
 |
 |
| Original Gaussian Profile | Top Hat profile after Beam Shaper |
|---|
The design is based on transmissive model that can be used with maximum input beam size of 4.6mm and output at 8mm. Currently, we have available design for 355nm, 532nm, 1064nm, 10.6um.
The output beam is collimated. Thus it can be used with normal lenses after the beam shaper. We are open for other wavelength requirement, depends on your specific applications.
BS-1064/532/355/266
| Part No. | Applicable Input Beam Size (mm) | Output Beam Size (mm) | Max. outer Dia (mm) | Total Length (mm) | Working Distance (mm) | Wavelength(nm) |
|---|---|---|---|---|---|---|
| BS-XXX | 4.6-5.0 | 6.0 | 27.0 | 170.7 | 25.0-200.0 | 1064/532/355/266 |
| BS-XXX-6-W600 | 5.8-6.0 | 5.0-5.5 | 30.0 | 175.5 | 100.0-600.0 | 1064/532/355 |
BS-10.6
| Part No. | Applicable Input Beam Size (mm) | Output Beam Size (mm) | Max. outer Dia (mm) | Total Length (mm) | Working Distance (mm) | Wavelength(um) |
|---|---|---|---|---|---|---|
| BS-10.6-12 | 12.0 | 12.0 | 38.0 | 270.0 | 25.0-200.0 | 9.4/10.6/11 |
| BS-10.6-3 | 3.0-4.0 | 3.0-4.0 | 28.0 | 109.0 | 25.0-100.0 | 9.4/10.6/11 |
 |
 |
 |
Applications:
It is commonly used for drilling and marking applications. The Top Hat profile cut or mark result has higher quality than the Gaussian. It is widely used in the industry.
For US market, contact www.eoc-inc.com Electro Optical Components, Inc. (EOC)