|
 RONAR-SMITH®
LASER OPTICS & IR IMAGING
|
 |
Power DPM Crystal
|
|

|
|
Diode-Pumped Solid State (DPSS) lasers are
the ideal laser tools of machining, material processing,
spectroscopy, wafer inspection, light show, medical
diagnostics and other applications. DPM (Diode-Pumped Microchip laser) crystals, which combine Nd:YVO4 and KTP, has been developed. The DPM crystals are mainly used for low power applications, for example, the Green Laser Pointers.
The pump power for the Low Power DPM crystals is suggested to be less than 300mW, and the generated green output power could be less than 10mW. And a heat deposit mechanics is needed.
|
| DPM Efficiency Curve |
|

|
|
Specification |
|
Parallelism
|
Less
than 5 arc second
|
|
Coatings
|
Incident
Surface: HR R>99.8% @1064nm HT R<5%
@808nm
HR R>99% @532nm
Output Surface: HR R>99.8% @1064nm HT
R<5% @532nm
|
|
Output
Wavelength
|
532nm
|
|
Beam
Mode
|
TEMoo
|
|
Output
Power
|
Less
than 10mW
|
|
|
Standard products |
|
P/N
|
Clear
Aperture (mm)
|
Length
(mm)
(Nd: YVO4 + KTP)
|
Total
Size (mm)
|
|
DPM-1-2.5
|
1x1
|
0.5
+ 2
|
1x1x2.5
|
|
DPM-1.5-2.5
|
1.5x1.5
|
0.5
+ 2
|
1.5x1.5x2.5
|
|
|
High Power DPM Crystal |
|

|
Another type of DPM (Diode-Pumped Microchip laser) crystal is now available for high power Diode Pumped Green Lasers. It consists of Nd:YVO4 and KTP, can used for high pump power, and generated high power green laser output. The typical pump power is suggested to be less than 500mW, and the generated green output power could be about 60mW. And a heat deposit mechanics is needed.
This DPM microchip lasers could be used in some laser display systems, for example: Green Laser Module, 3D lasers, Club lasers and Disco lasers. |
|
DPM Efficiency Curve |
|

|
|
Specification |
|
Parallelism
|
Less
than 5arc second
|
|
Coatings
|
Incident
Surface: HR R>99.8% @1064nm HT
R<5%@808nm
HR R>99% @532nm
Output Surface: HR R>99.8% @1064nm HT
R<5%@532nm
|
|
Output
Wavelength
|
532nm
|
|
Beam
Mode
|
TEM00
|
|
Output
Power
|
5mW
~ 60mW
|
|
|
Standard products |
|
P/N
|
Clear
Aperture (mm)
|
Length
(mm)
(Nd: YVO4 + KTP)
|
Total
Size (mm)
|
|
DPM-1-2.5H
|
1x1
|
0.5
+ 2
|
1x1.5x2.5
|
|
DPM-1.5-2.5H
|
1.5x1.5
|
0.5
+ 2
|
1.5x2x2.5
|
|
|
|
 |