Almost thousand items... 
Distributor Area
Laser Cutting Header with Water/Air Cooled
Good news! Now Wavelength-tech has the new type of Laser Cutting Headers whose ID number is CH-XX-EFL, such as CH-10.6-50.8.
For example, the CH-10.6 can be used in CO2 cutting machine for acrylic, paper, clothe and so on to reflect and focalize the expanded beam into small spot. In this brochure the specifications and construction of the header will be introduced to you.
Specifications
Maximum Power |
500W |
|---|---|
Laser Wavelength |
Fiber or YAG Laser 1064nm, CO2 Laser 10.6um, or 532nm and 355nm |
Focal lens Cooling |
Water or Air Cooled |
Proper alignment of optics after working distance adjusted |
+/- 0.1mm |
Working distance adjustable range |
0mm-42mm (not the working distance but the adjustable range) |
Mirror Diameter |
38.1mm |
Reflection |
>99.5% |
Input Diameters |
24mm maximum |
Mirror tilt angle |
Adjustable,+/- 3degree |
Focal length |
Specified by clients |
Constructions
The CH-10.6 can reflect and focal the laser beam into spot on the working plane. The details are shown as follows.
• It has a reflect mirror with diameter of 38.1mm and coating’s reflection more than 99.5%.
• It has mount for reflect mirror. The input beam diameter maximum is 24mm.
• The titled degree of the mirror could be adjusted with four adjusting screws.
• It has the Focal lens with different focal length, such as 50.8mm and 63.5mm, which can be selected by clients. and the working distance could be adjusted by the guider.
• It has the holder for focal lens with WATER or AIR COOLED device. The device has the water/air input and output connectors. You just need insert the pipe into the connectors.
• It has the linear guider with high precision.
• The Working Distance of the focal length could be adjusted by the screw pole.